The Everspring Outdoor Flood Light EH403 provides brightness in dark corners and an increased sense of security.
By combining a 20W spotlight with a PIR motion detector, you can perfectly illuminate the path to and around your house. The separate adjustment of brightness and light duration allows you to configure each device individually.
Small yet powerful, this slim design floodlight with PIR detector is a compact fully automatic security floodlight. Its aesthetic design makes it suitable for installation in front areas of the house typically occupied by spotlight and lanterns. When connected to the Z-Wave controller, the user is able to remotely turn on/off the floodlight and receive notification when the PIR detects motion.
+ Spotlight with integrated PIR motion detector
+ Cool white (5000K)
+ Wireless two-way audio
+ Comply with S2 security solution
+ Auto-pairing to the gateway
+ IP44 waterproof for outdoor use
+ VR adjustment for time & lux setting
+ Swivel lens angle
+ Test mode for easy installation at outdoors
+ Wireless technology: Z-Wave Plus
+ Function: 20W LED floodlight with PIR
+ Frequency range: 868.42 MHz
+ RF protocol: Z-Wave Plus, SDK 6.71
+ RF range (open space): >100m
+ Colour temp (K): 5000K, cool white
+ CRI: ≧70
+ Lumen (lm): 20w > 1500 lm
+ Beam angle: >90°
+ Power input: AC100V – 240V, 50/60Hz
+ PIR detection angle/range: 110° at 8m, 2.4m Height
+ Sensor swivelling angle: Horizontal: 60°, Up to 30° Leftward, Up to 30° Rightward
+ Lux adjustment: 30 – 200Lux & test mode
+ Time adjustment: 8±5 Sec – 12±4 Min
+ Electrical classification: CLASS II
+ Dimensions (mm): 201(W) x 196(D) x 88.8(H)
+ Popp Hub Powered POPE700823 - (Revision 2.3.8 - 1.1)
+ Popp Hub Smart Home Gateway POPE011801 - (Revision 2.3.8 - 1.1)
+ Popp Home Smart Camera Gateway POPEHOME - (Revision 040202 - 1.1)
+ Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.8 - 1.1)
+ Z-Wave.me USB Stick incl. Z-Way Controller Software ZMEEUZBWAY - (Revision 2.3.8 - 1.1)
+ Z-Wave.me Z-Wave USB Stick - For WD My Cloud ZMEEUZBWD - (Revision 2.3.8 - 1.1)
+ Z-Wave.Me RaZberry2 Z-Wave Module ZMEERAZ2 - (Revision 2.3.8 - 1.1)
+ Z-Wave.Me UZB Smart Home Stick ZMEEUZB1 - (Revision 2.3.8 - 1.1)
+ Zipato Zipatile Black ZIPETILEZIG-B - (Revision 1.7.61j - 1.1)
+ Zipato Zipatile White ZIPETILEZIG-W - (Revision 1.7.61j - 1.1)
+ Zipato Zipabox2 ZIPEBOX2 - (Revision 1.7.61 - 1.1)
+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.540 - 1.1) - Only the brightness is displayed. On/Off can be controlled via LUA.
+ Vera Plus Smart Home Gateway MCVEVERA_PLUS - (Revision 1.7.4453 - 1.1) - Motion sensor not shown
+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.540 - 1.1) - Only the brightness is displayed.
SmartThings, Hubatat, Open Source software and other community driven Home Automation devices are not listed as these have both Manufacturer/Publisher compatibility alongside community created "Drivers" or "Handlers" so all Z-Wave & Zigbee devices are technically compatible with the correct driver.
*Compatibility chart correct at time of publishing, products may have been incorporated in more recent firmware. If your product shows as partly or not compatible please check on the manufacturers website or forum for updates.