Aeotec MultiSensor 6

Aeotec MultiSensor 6

Available: Available

2 in Local Stock | Dispatches same or next day

Not many left!!!

  • Brand:Aeotec
  • Support:Full UK/EU Based Tech Support
  • Technology:✓ Z-Wave
£46.95

Make your home really intelligent.

One tiny device packed full of intelligence.
A smart home is only truly smart when it’s intelligent. A smart home has to offer more than a schedule; it has to react to what’s occurring in a home in real-time. MultiSensor 6 is the foundation of a modern smart home; within its perfectly small exterior lies all the technology for real-time intelligence.

6 sensors. 6 times the smarts.

Motion Sensor

Motion for security. Motion for presence. Motion for management. MultiSensor 6's motion sensor is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, MultiSensor 6 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – MultiSensor 6 makes your home automation system more powerful and more intelligent.

Temperature Sensor

From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. MultiSensor 6 provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50°C (14 to 122°F) and reporting temperature changes back to a smart home gateway.

Light Sensor

Automated lighting is only as smart as the system that powers it. With MultiSensor 6 real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains, to setting lights to be the perfect level be it day or night, MultiSensor 6 is the smarts behind smart lighting.

Humidity Sensor

Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. MultiSensor 6 offers incremental monitoring of a humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. MultiSensor 6 monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.

Vibration Sensor

It measures the environment it's in, and it also measures itself. MultiSensor 6 contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect MultiSensor 6 – it'll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They'll also be able to record subtle seismic activity within your home.

UV Sensor

Perfectly managing an environment means understanding it perfectly. MultiSensor 6 accurately measures ultraviolet light the kind of light that causes everything from furniture bleaching to eye damage. Measured inline with the World Health Organisations UV Index, MultiSensor 6 measures a rooms UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.

Not all MultiSensors are created equal.

There are MultiSensors and then there are MultiSensors. MultiSensor 6 isn’t just a redesign of Aeotec’s most intelligent sensor, it’s a complete reengineering from the inside out. We didn’t just tweak our first Multisensor, we redefined it.

Tamper protection.
Now securer, MultiSensor 6 offers tamper protection, constantly monitoring itself to warn of movements or attempts to prevent it securing your home.

Secure communication.
As it secures and monitors your home, MultiSensor 6 is now itself secure. Communication between the sensor and your Z-Wave network is now encrypted using the AES-128 bit data encryption.

Superior wireless.
Further and faster, MultiSensor 6’s wireless signals now reach 50% further, up to 150 metres, and 250% faster.

Calibration.
For superior accuracy, MultiSensor 6 can be calibrated for every room and every environment with manual calibrations wirelessly available for its temperature, humidity, light and UV measurements.

4 times the life.
Forget changing your batteries a few times a year. MultiSensor 6 now works up to 2 years before you need to change batteries offering 4 times the battery life of the first MultiSensor.

Superior quality.
We’ve searched the world for the best sensors to power its 6 sensors. MultiSensor 6’s specialist sensors are now sourced from leading companies in Switzerland and the USA.

Half the batteries.
Four different AAA batteries have powered past MultiSensors. Despite doubling the battery life of MultiSensor 6, we’ve reduced the number of batteries that power it down to just 2.

Lighter and easier.
Easier to install in all sorts of ways, MultiSensor 6 weighs 50% less than the first MultiSensor making it installable even with double sided tape.

Hello Fahrenheit.
Wherever you are in the world, MultiSensor 6 speaks your language. Imperial Fahrenheit joins Celsius in the new sensor.

Digital light.
Measuring light between 0 lux to 30000 lux, gone is the analogue light sensor with it replaced in MultiSensor 6’s with real-time, digital measurements.

70% smaller.
Sometimes smaller is better. Completely redesigned and reengineered, MultiSensor 6 is 70% smaller and 100% more elegant.

6 in 1.
Amazing things come in smaller packages. MultiSensor 6 offers 6 different sensors, with UV and vibration sensors joining light, humidity, motion and temperature sensors.

Simple to install in so many ways.

Because it’s capable of capturing so much useful data and offering so much intelligence to your smart home, there are a lot of places you might want to install MultiSensor 6 within your home. Yes, the traditional ceiling-corner location is one of them. But because it’s now 70% smaller than previous MultiSensors and weighs only 74 grams, MultiSensor 6 can now be installed almost anywhere.

Not just small. Perfectly small.

Creating an object designed to secure and manage your home takes precision. It also takes subtlety. MultiSensor 6 is perfectly small. Its beautifully tapered, 42 mm body allows it to be used anywhere within the home, but its design and styling hasn’t been crafted simply to be attractive. A squared based allows MultiSensor 6 to offer a battery life of over 2 years, the best of any Z-Wave motion sensor. Rounded edges distance MultiSensor 6 from the ocular, security camera styling of the round MultiSensor we pioneered and that feels invasive in this age of privacy.

MultiSensor 6 has been designed to be more than beautiful; it’s been designed so that its presence in a room is never obvious. Subtle is smart.

Perfect batteries.

Your home’s intelligence will depend on it, and so might its security, so MultiSensor 6 needs to be powered by the best battery configuration possible.

MultiSensor 6 has been engineered to use two CR123A batteries. Their Li-MnO2 chemistry offers up to 2 years’ battery life and 3,000 mAh of power capacity in a super compact size that’s only 17mm / 0.6” in diameter.

Perfect power.

Perfect battery life isn’t perfect for every installation. For all those times, MultiSensor 6 can be run on mains power. Simply connect it to your home’s electricity using the provided USB cable and MultiSensor 6 will be able to run in an advanced mode, providing temperature, humidity and light readings in real-time.

Perfect antenna.

There’s small, and there’s perfectly small. MultiSensor 6 is the latter.

It’s possible to engineer devices to be too small, limiting their functionality and creating performance and safety issues. MultiSensor 6 avoids all that, offering the perfect balance between form and function.Within its 42mm body sit 5 different PCBs, 6 different sensors and the capacity for over 2 years’ of battery performance. Better still, MultiSensor 6 includes a perfectly engineered antenna that can accurately perform up to 150 metres / 492 feet point-to-point.

Precision engineering.

Sensor technology gets more impressive every day. Your smartphone benefits from it, and now your home can too.

MultiSensor 6 has been precision engineered based on a very simple premise: for a smart home to truly be smart it has to be intelligent. Really intelligent. Around that idea we’ve built a sensor that offers your home 6 key points of intelligence that Z-Wave smart home systems can use to make truly smart decisions.

Outdoor sensor.
Use outdoor intelligence. When installed in a waterproof & anti-condensation enclosure, you can use MultiSensor 6’s non-motion sensors outdoors.

Accurate sensor.
Designed and calibrated to be as accurate as possible, MultiSensor 6’s six sensors are fine tuned to have accuracy variations that are as little as only ±0.2%.

Updated sensor.
An intelligent sensor that will keep getting more intelligent, you can update MultiSensor 6’s settings and firmware using wirelessly.

Battery detection.
When run on batteries, MultiSensor 6 will send low battery warnings to your Z-Wave gateway before it’s time to change them.

Sensitivity.
MultiSensor 6 is sensitive to change. But it might be too sensitive for your needs. You can decrease or increase the sensor’s sensitivity from your Z-Wave gateway.

Calibration.
Every MultiSensor 6 is calibrated by our engineers for precision. And you can calibrate it too, adjusting the values of its sensors to be precise for your home, indoors and out.

Power modes.
Its 2 year battery life is fantastic. But power it by cable and MultiSensor 6 can make even more accurate and more frequent sensor measurements.

Tamper detection.
Its security features are themselves secured. MultiSensor 6’s AES 128 bit wireless encryption is complemented by anti-tamper and drop sensors.

Perfect wireless.
An intelligence and security sensor needs to offer reliable wireless. MultiSensor 6 does. Its fine tuned antenna means that it can communicate with other Z-Wave devices up to 150 metres / 492 feet away.

+ Power supply: USB DC 5V | Battery power (2 × CR123A batteries, 3V, 1500mAh) | Not compatible to rechargeable CR123A batteries (3.7V)
+ Maximum power consumption during a report: 200mA
+ Repeater: USB power - Yes, Min Voltage = 4.5VDC, Max Voltage = 5.5VDC | Battery Power - No, Min Voltage = 2.6VDC | Max voltage = 3.2VDC
+ Temperature range: -10°C to 50°C | 14°F to 122°F
+ Temperature Accuracy: ±1°C | ±1.8°F
+ Measured humidity range: 20%RH to 90%RH
+ Humidity Accuracy: ±3%RH (at 25°C/77°F)
+ Lighting: 0 LUX to 30000 LUX
+ UV Range: 0 to 10 UV index
+ Operating humidity: 8% to 80%
+ Operating temperature: 0°C to 40°C | 32°F to 104°F
+ Max motion sensitivity: 5 metres | 15 feet
+ Water proofing: IP20 rating
+ Battery Life: ~1.5 years using 2x CR123A batteries
+ Operating distance: Up to 492 feet outdoors | Up to 150 metres outdoors
Dimensions (WxHxL): 45 x 45 x 40 mm
+ Wireless Technology: Z-Wave Plus
+ Frequency: 868.4MHz

Fully Compatible*

+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.530 - 1.12)

Popp Hub Powered POPE700823 - (Revision 2.3.8 - 1.12)

+ Popp Hub Smart Home Gateway POPE011801 - (Revision 2.3.8 - 1.12)

Popp Home Smart Camera Gateway POPEHOME - (Revision 040126 - 1.12)

+ Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.8 - 1.12)

Z-Wave.me USB Stick incl. Z-Way Controller Software ZMEEUZBWAY - (Revision 2.3.8 - 1.12)

+ Vera Plus Smart Home Gateway MCVEVERA_PLUS - (Revision 1.7.2236 - 1.8)

Vera Edge Smart Home Gateway MCVEVERA_EDGE - (Revision 1.7.2236 - 1.7)

+ Z-Wave.me Z-Wave USB Stick - For WD My Cloud ZMEEUZBWD - (Revision 2.3.8 - 1.12)

Z-Wave.Me RaZberry2 Z-Wave Module ZMEERAZ2 - (Revision 2.3.8 - 1.12)

+ Z-Wave.Me UZB Smart Home Stick ZMEEUZB1 - (Revision 2.3.8 - 1.12)

Zipato Zipatile Black ZIPETILEZIG-B - (Revision 1.3.13e - 1.12) - UV not tested

+ Zipato Zipatile White ZIPETILEZIG-W - (Revision 1.3.13e - 1.12) - UV not tested

Zipato ZipaMicro ZIPMICRO - (Revision 1.3.13 - 1.12) - UV not tested

Zipato Zipabox2 ZIPEBOX2 - (Revision 1.3.50 - 1.12)

Partly Compatible*

+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.100 - 1.7) - Transmission only in unsecure mode (unsecure inclusion) UV sensor does not show values.

Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.110 - 1.8) - Can only be securely included while it is mains-powered, UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.130 - 1.8) - Can only be securely included while it is mains-powered, UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Fibaro Home Center Lite FIB_FGHCL - (Revision 4.100 - 1.7) - Transmission only in unsecure mode (unsecure inclusion) UV sensor does not show values.

Fibaro Home Center Lite FIB_FGHCL - (Revision 4.130 - 1.8) - Can only be securely included while it is mains-powered, UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Popp Hub Powered POPE700823 - (Revision 2.3.4 - 1.8) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

+ Popp Hub Powered POPE700823 - (Revision 2.3.6 - 1.11) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Popp Hub Smart Home Gateway POPE011801 - (Revision 2.3.4 - 1.8) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Popp Hub Smart Home Gateway POPE011801 - (Revision 2.3.6 - 1.11) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.4 - 1.8) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

+ Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.6 - 1.11) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Z-Wave.me USB Stick incl. Z-Way Controller Software ZMEEUZBWAY - (Revision 2.3.4 - 1.8) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Z-Wave.me USB Stick incl. Z-Way Controller Software ZMEEUZBWAY - (Revision 2.3.6 - 1.11) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

+ Vera Edge Smart Home Gateway MCVEVERA_EDGE - (Revision 1.7.2236 - 1.8) - Full function only with mains-powered inclusion, UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval, motion does not work when the device was included in battery mode.

Z-Wave.me Z-Wave USB Stick - For WD My Cloud ZMEEUZBWD - (Revision 2.3.4 - 1.8) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Z-Wave.me Z-Wave USB Stick - For WD My Cloud ZMEEUZBWD - (Revision 2.3.6 - 1.11) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Z-Wave.Me RaZberry2 Z-Wave Module ZMEERAZ2 - (Revision 2.3.4 - 1.8) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

+ Z-Wave.Me RaZberry2 Z-Wave Module ZMEERAZ2 - (Revision 2.3.6 - 1.11) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Z-Wave.Me UZB Smart Home Stick ZMEEUZB1 - (Revision 2.3.4 - 1.8) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

Z-Wave.Me UZB Smart Home Stick ZMEEUZB1 - (Revision 2.3.6 - 1.11) - UV sensor does not show values, in battery mode sensor values are only transmitted with wakeup interval.

NOT Compatible*

Zipato ZipaboxG1 ZIP_Zipabox-G1 - (Revision 1.0.17 - 1.7)

Zipato ZipaboxG1 ZIP_Zipabox-G1 - (Revision 1.2.29 - 1.8) - No data recorded

Additional

SmartThings, Hubatat, Open Source software and other community driven Home Automation devices are not listed as these have both Manufacturer/Publisher compatibility alongside community created "Drivers" or "Handlers" so all Z-Wave & Zigbee devices are technically compatible with the correct driver.

*Compatibility chart correct at time of publishing, products may have been incorporated in more recent firmware. If your product shows as partly or not compatible please check on the manufacturers website or forum for updates.