With the smart Aeotec RGB Bulb colour comes into play. The LED bulb fits into every E27 bulb holder and can be connects to a smart home center through Z-Wave wireless technology right after screwing in. The required radio chip is already integrated into the bulb’s housing. Via remote control, smartphone or tablet you can vary brightness and light colour as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes or use scenes (e.g. in case of an alarm) activating appropriate light colour.
The bulb uses a LED technology which is already used by Well-known manufacturers such as Samsung and Philips. Thereby 15 different LED diodes to shine in perfect shading of natural white light. These 15 diodes create a light temperature of 2580-7050K on the LED bulb.
+ Cold white: 4745K to 7050K
+ Natural white: 3710K to 4745 K
+ Warm white: 2580K to 3710K
Due to LED technology, power consumption is very low compared to conventional bulbs. The Aeotec bulb is as bright as a conventional 70W bulb, but needs only 9W.
+ Lamp for E27 socket
+ Integrated radio chip
+ Colours: 4-channel RGBW 16 million colours, warm and cold white
+ Power Consumption: max. 9 W
+ Angle of radiation: 180°
+ Wireless Technology: Z-Wave Plus
+ Dimensions: 145x70x70 mm
+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.130)
+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.140)
+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.160)
+ Fibaro Home Center Lite FIB_FGHCL - (Revision 4.130)
+ Fibaro Home Center Lite FIB_FGHCL - (Revision 4.140)
+ Fibaro Home Center Lite FIB_FGHCL - (Revision 4.160)
+ Popp Hub Smart Home Gateway POPE011801
+ Z-Wave.me USB Stick incl. Z-Way Controller Software ZMEEUZBWAY
+ Vera Plus Smart Home Gateway MCVEVERA_PLUS
+ Z-Wave.me Z-Wave USB Stick - For WD My Cloud ZMEEUZBWD
+ Z-Wave.Me RaZberry2 Z-Wave Module ZMEERAZ2
+ Z-Wave.Me UZB Smart Home Stick ZMEEUZB1
+ Zipato Zipatile Black ZIPETILEZIG-B
+ Zipato ZipaboxG1 ZIP_Zipabox-G1 - (Revision 1.1.38)
+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.110)
+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.170)
+ Fibaro Home Center Lite FIB_FGHCL - (Revision 4.110)
+ Fibaro Home Center Lite FIB_FGHCL - (Revision 4.170)
+ Zipato ZipaboxG1 ZIP_Zipabox-G1 - (Revision 1.2.29)
SmartThings, Hubatat, Open Source software and other community driven Home Automation devices are not listed as these have both Manufacturer/Publisher compatibility alongside community created "Drivers" or "Handlers" so all Z-Wave & Zigbee devices are technically compatible with the correct driver.
*Compatibility chart correct at time of publishing, products may have been incorporated in more recent firmware. If your product shows as partly or not compatible please check on the manufacturers website or forum for updates.