The power of simplicity.
Is something opened or closed? The key to home automation is intelligence. And that’s what Door / Window Sensor Gen5 provides. There’s power in the simplicity of knowing if your home’s doors and windows are opened or closed. And there’s power in monitoring them to see when they’re opened or closed, no matter where in the world you are.
Aeotec’s Door / Window Sensor Gen5 brings powerful intelligence to any object that you attach it to. Doors. Windows. Cupboards. Whatever it is that opens or closes, you can keep an eye on it whether you’re home or not.
The power of knowing.
With simple intelligence comes huge capabilities. With Door / Window Sensor Gen5 attached, you can do more than simply monitor entrance ways and windows – you can build powerful home control and security automations.
Intruders nearly always uses doors and windows to break into your home. Use Door / Window Sensor Gen5 as part of a Z-Wave security system to protect your home, valuables, and loved ones.
Not everything is about breaking in. From children being in rooms they shouldn’t to toddlers accessing medical cupboards, Door / Window Sensor Gen5 lets you remotely monitor your home’s internal doors and protect your family.
Leaving home but have left a window open? Never again. A combination of your Z-Wave gateway’s notification system and Door / Window System Gen can remind you of the doors and windows you haven’t closed or secured.
Smart homes are only smart when they understand the state of a home. Door / Window Sensor Gen5 lets your Z-Wave system better manage the ambience your home, whether that’s lighting or cooling or anything else, by understanding when doors and windows are used, closed or opened.
Simple to install.
Security and intelligence simply. Door / Window Sensor Gen5 is the sensor that can be installed in moments. Using either the provided screws or the double sided tape, you simply need to affix its 2 parts on a door or window and its frame. From there, pair it with your Z-Wave system. It’s all setup in moments.
Just because it’s easy to install doesn’t mean that it can be removed without anyone noticing. Door / Window Sensor Gen5 monitors itself to make sure that it’s always working – it also monitors itself to make sure that no one attempts to move or remove it. Should that happen, Door / Window Sensor’s inbuilt tamper detection system will send a notification to your Z-Wave network and any of the devices you connect.
Set it. Forget it.
Because it’s built upon both Z-Wave Plus and Aeotec’s exclusive Gen5, Door / Window Sensor Gen5 offers not just excellent security but also excellent battery life. You’ll set it up and not have to do anything else. Door / Window Sensor Gen5 offers as much as 2 years’ battery life with normal use and an excellent 400 days of operation with frequent use.
+ Detection of open, closed or tilted thanks to patented sensor technology
+ Built in tamper protection
+ Potential free binary input to connect external sensors
+ Up to 3 years battery lifetime
+ Tilt angle at least 5°
+ Z-Wave Smart Start and S2 Security
+ Wireless technology: Z-Wave Plus
+ Dimensions: 28 x 95 x 35 mm
+ Weight: 13g
+ Hardware Platform: ZM5101
+ IP Class: IP 20
+ Voltage: 3.6V
+ Repeater: No
+ Beaming: No
+ Max standby power: 0.8W
+ Operating temperature: 0℃ to 40℃ | 32℉ to 104℉
+ Operational humidity: 8% to 80%.
+ Operating distance: Up to 492 feet outdoors | Up to 150 meters outdoors
+ Operating distance: Up to 300 feet | 100 metres outdoors
+ Device Type: Notification Sensor
+ Network Operation: Reporting Sleeping Slave
+ Firmware Version: 01.00
+ Z-Wave Version: 06.02 Z-Wave
+ Product Id: 0371.0002.0007
+ Wireless Technology: Z-Wave Plus
+ Frequency: 868.4MHz
+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.130 - 1.5)
+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.160 - 1.5)
+ Fibaro Home Center Lite FIB_FGHCL - (Revision 4.130 - 1.5)
+ Fibaro Home Center Lite FIB_FGHCL - (Revision 4.160 - 1.5)
+ Popp Hub Powered POPE700823 - (Revision 2.3.4 - 1.5)
+ Popp Hub Powered POPE700823 - (Revision 2.3.6 - 1.5)
+ Popp Hub Smart Home Gateway POPE011801 - (Revision 2.3.4 - 1.5)
+ Popp Hub Smart Home Gateway POPE011801 - (Revision 2.3.6 - 1.5)
+ Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.4 - 1.5)
+ Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.6 - 1.5)
+ Z-Wave.me USB Stick incl. Z-Way Controller Software ZMEEUZBWAY - (Revision 2.3.4 - 1.5)
+ Z-Wave.me USB Stick incl. Z-Way Controller Software ZMEEUZBWAY - (Revision 2.3.6 - 1.5)
+ Z-Wave.me Z-Wave USB Stick - For WD My Cloud ZMEEUZBWD - (Revision 2.3.4 - 1.5)
+ Z-Wave.me Z-Wave USB Stick - For WD My Cloud ZMEEUZBWD - (Revision 2.3.6 - 1.5)
+ Z-Wave.Me RaZberry2 Z-Wave Module ZMEERAZ2 - (Revision 2.3.4 - 1.5)
+ Z-Wave.Me RaZberry2 Z-Wave Module ZMEERAZ2 - (Revision 2.3.6 - 1.5)
+ Z-Wave.Me UZB Smart Home Stick ZMEEUZB1 - (Revision 2.3.4 - 1.5)
+ Z-Wave.Me UZB Smart Home Stick ZMEEUZB1 - (Revision 2.3.6 - 1.5)
+ Zipato ZipaMicro - (Revision 1.3.13e - 1.5)
+ Vera Plus Smart Home Gateway MCVEVERA_PLUS - (Revision 1.7.3532 - 1.5) - No security tamper key element
+ Zipato ZipaMicro ZIPMICRO - (Revision 1.3.13 - 1.5) - No security tamper key element
+ Zipato ZipaboxG1 ZIP_Zipabox-G1 - (Revision 1.0.17 - 1.5) - No security tamper key element
SmartThings, Hubatat, Open Source software and other community driven Home Automation devices are not listed as these have both Manufacturer/Publisher compatibility alongside community created "Drivers" or "Handlers" so all Z-Wave & Zigbee devices are technically compatible with the correct driver.
*Compatibility chart correct at time of publishing, products may have been incorporated in more recent firmware. If your product shows as partly or not compatible please check on the manufacturers website or forum for updates.