Aeotec Home Energy Meter – Three Clamps GEN5 (100A)

Aeotec Home Energy Meter – Three Clamps GEN5 (100A)

Available: Unavailable

No Longer Available

  • Brand:Aeotec
  • Support:Full UK/EU Based Tech Support
  • Technology:✓ Z-Wave
£124.95

Record how much electricity you spend.

A smart meter for Z-Wave.

Home Energy Meter is the smart meter that you control. It’ll record up to 200 amps of your home’s electricity use in real-time with 99% accuracy. And it’ll share it with your Z-Wave gateway, but no one else.

Actionable data.

You’ll know how much you’re spending, and you’ll be able to reduce it.

Monthly power bills typically go in one direction: up. Home Energy Meter helps you reverse that trend. With 99% accuracy it measures your home’s electricity use in watts or kilowatt-hours. Paired with your Z-Wave gateway, it’ll help you identify and diagnose which electronics in your home are costing you the most. Whether it’s your lighting, your hot water system or anything else, you’ll then be able to take actionable steps to reduce how much those electronics are costing you.

Fantastic wireless range.

Electricity meters are typically installed outside the home or in hard to reach places. As Home Energy Meter is installed right beside your home’s existing meter, it needs to be built upon excellent wireless technology. It is.

Utilising Z-Wave Plus and Gen5, Home Energy Meter offers wireless connectivity that is optimised to transmit over greater distances and even through walls. Without interference, Home Energy Meter can transmit your home’s electricity use over a distance of 492 feet / 150 metres with your data securely broadcast using AES-128 encryption.

+ Dimensions (WxHxL): 96 x 70 x 230 mm
+ Weight: 578g
+ Dimensions (WxHxL) 96 x 70 x 230 mm
+ Hardware Platform: ZM5202
+ IP Class: IP 44
+ Voltage: 400V
+ Load: 100A
+ Measurement Accuracy: Over 99%
+ Operating humidity: 8% to 80%
+ Operating temperature: 0°C to 40°C | 32°F to 104°F
+ Operating distance: Up to 427 feet outdoors | Up to 130 metres outdoors
+ Beaming: Yes
+ Repeating: Yes
+ AES128 Security: Yes
+ Device Type: Smart Meter
+ Firmware Version: 01.02
+ Z-Wave Version: 4.22
+ Certification ID: ZC10-16105288
+ Z-Wave Product Id: 0x0086.0x0002.0x005f

Fully Compatible*

+ Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.180 - 1.4) - Parameter 101 must be set to value 4144911

Fibaro Home Center Lite FIB_FGHCL - (Revision 4.170 - 1.4) - Parameter 101 must be set to value 4144911

+ Popp Hub Powered POPE700823 - (Revision 2.3.8RC - 1.4)

Popp Hub Smart Home Gateway POPE011801 - (Revision 2.3.8RC - 1.4)

+ Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.8RC - 1.4)

Z-Wave.me USB Stick incl. Z-Way Controller Software ZMEEUZBWAY - (Revision 2.3.8RC - 1.4)

+ Vera Edge Smart Home Gateway MCVEVERA_EDGE - (Revision 1.7.4001 - 1.4)

Z-Wave.me Z-Wave USB Stick - For WD My Cloud ZMEEUZBWD - (Revision 2.3.8RC - 1.4)

+ Z-Wave.Me RaZberry2 Z-Wave Module ZMEERAZ2 - (Revision 2.3.8RC - 1.4)

Z-Wave.Me UZB Smart Home Stick ZMEEUZB1 - (Revision 2.3.8RC - 1.4)

Partly Compatible*

+ Popp Hub Powered POPE700823 - (Revision 2.3.4 - 1.2) - Associations are not possible. Automatic update of the values does not work. Periodic polling of device required to capture data.

Popp Hub Smart Home Gateway POPE011801 - (Revision 2.3.4 - 1.2) - Associations are not possible. Automatic update of the values does not work. Periodic polling of device required to capture data.

Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.4 - 1.2) - Associations are not possible. Automatic update of the values does not work. Periodic polling of device required to capture data.

Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.4 - 1.2) - Associations are not possible. Automatic update of the values does not work. Periodic polling of device required to capture data.

+ Z-Wave.me RaZberry EU ZMEERAZ - (Revision 2.3.4 - 1.2) - Comment here

Z-Wave.me USB Stick incl. Z-Way Controller Software ZMEEUZBWAY - (Revision 2.3.4 - 1.2) - Associations are not possible. Automatic update of the values does not work. Periodic polling of device required to capture data.

+ Vera Edge Smart Home Gateway MCVEVERA_EDGE - (Revision 1.7.2236 - 1.2) - Associations are not possible

Z-Wave.me Z-Wave USB Stick - For WD My Cloud ZMEEUZBWD - (Revision 2.3.4 - 1.2) - Associations are not possible. Automatic update of the values does not work. Periodic polling of device required to capture data.

+ Z-Wave.Me RaZberry2 Z-Wave Module ZMEERAZ2 - (Revision 2.3.4 - 1.2) - Associations are not possible. Automatic update of the values does not work. Periodic polling of device required to capture data.

Z-Wave.Me UZB Smart Home Stick ZMEEUZB1 - (Revision 2.3.4 - 1.2) - Associations are not possible. Automatic update of the values does not work. Periodic polling of device required to capture data.

Zipato ZipaboxG1 ZIP_Zipabox-G1 - (Revision 1.2.24 - 1.2) - Associations are not possible

NOT Compatible*

Fibaro Home Center 2 FIB_HOMEC2 - (Revision 4.130 - 1.2) - No measurement readings

+ Fibaro Home Center Lite FIB_FGHCL - (Revision 4.130 - 1.2) - No measurement readings

Zipato Zipatile Black ZIPETILEZIG-B - (Revision 1.3.13e - 1.4)

+ Zipato Zipatile White ZIPETILEZIG-W - (Revision 1.3.13e - 1.4)

Zipato ZipaMicro ZIPMICRO - (Revision 1.3.13 - 1.4)

Additional

SmartThings, Hubatat, Open Source software and other community driven Home Automation devices are not listed as these have both Manufacturer/Publisher compatibility alongside community created "Drivers" or "Handlers" so all Z-Wave & Zigbee devices are technically compatible with the correct driver.

*Compatibility chart correct at time of publishing, products may have been incorporated in more recent firmware. If your product shows as partly or not compatible please check on the manufacturers website or forum for updates.