The LC-13 by Danfoss is a Z-Wave controlled electronic radiator thermostat. It is applied to be mounted on wall heating valves and controls them by a motor. The device accepts a set point that is either set manually using local buttons on the device or wirelessly using Z-Wave. Beside setting a desired temperature the device will support special heating schemes, such as energy saving and frost protection. A small LCD display on the device shows the target temperature on request.
The device owns further intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.
The Danfoss LC-13 thermostat can be mounted with few movements to valves with standard M30x1.5 connector or RA2000 (Danfoss snap in). The device expects a regular radio connection to the IP gateway for status message exchange.
+ Thermostat for water-based radiators
+ Local control buttons
+ LCD display (target temperature)
+ For valves with standard M30x1.5 connector (30x1,5) or RA2000 (Danfoss snap in).
+ Low-noise motor
+ Child protection
+ Wireless Technology: Z-Wave
+ Dimensions: 51 x 51 x 71 mm
+ Technology: Z-Wave (868.42MHz)
+ Z-Wave SDK: v4.5
+ Thermostat temperature range: 4 - 28°C
+ Control: The units Setpoint can be changed by the Z-Wave controller
+ Backlit LCD: displays temperature
+ 3-button operation: '+' and '-' adjustment, inclusion and exclusion
+ Adaptors: Supplied with RA and M30 x 1.5(K) valve adaptors
+ Power: 2x AA batteries (1-year lifespan)
+ Dimensions: 91 (L) x 51mm (Dia)
+ Danfoss Link