ENER-J 10 Amp Receiver For Wireless Switch

ENER-J 10 Amp Receiver For Wireless Switch

Availability: Available

Dispatches same or next day

  • Brand:ENER-J
  • Support:Full UK/EU Based Tech Support
  • Technology:✓ Kinetic Switching
£18.95

ENER-J's 10 Amp Receiver For Wireless Switch.

Switch Ordinary Pairing

1. Long press the key of controller for 3 seconds, the indicator light flashes.
2. Press down the switch key, the indicator light will go out, which means that the pairing is successful.
3. If the pairing switch is push button switch and the lamp is dimming, long press the switch to adjust brightness of the lamp.

Switch Direction Pairing

1. Long press the key of controller for 3 seconds, the indicator light flashes.
2. Quickly press the switch twice (within 0.5 seconds) the indicator light will go out, which means that the pairing is successful.
3. Rocker switch after direction pairing means always *upside--Off/ downside--On.
4. Push button switch left and right two keys as a group, press the right key to ON, press the left key to OFF. In dimming mode keep press the right key to brighten, keep press the left key to dim.

Clean pairing information

1. Long press the pairing button for 13 seconds, the indicator light flashing until it goes off.
2. After the pairing information is cleared, the pairing switch is no longer valid. Need to be repaired to use.

Replace the fuse