ENER-J Dimmable 1 Amp Receiver For Wireless Switch

ENER-J Dimmable 1 Amp Receiver For Wireless Switch

Availability: Available

Currently 2 - 5 days dispatch

  • Brand:ENER-J
  • Technology:✓ 433MHz ✓ Alexa ✓ Google Home
£28.95

ENER-J's Dimmable 1 Amp Receiver For Wireless Switch has no Battery, no Wiring, no WiFi but is a self-powered (kinetic) Smart Switch & Dimming Controller Receiver for House Lighting & Appliances. Install wherever you desire or as a portable hand-held switch.

Control via ENER-J's Smart App, Amazon Alexa, Google Home or RF433MHz receiver. Smart Lighting simplified!

No Battery, No Wiring & No WiFi Require

Innovative kinetic energy technology to produce electricity, switch can be installed wherever without running additional wires; No need to connect WiFi & tear walls; save material cost & engineer labour fee! Eco-Friendly.

Secure Wireless Signal

Encrypted wireless signal can go through walls without interference problems, unique communication code between switch and receiver; 30M indoor using, outdoor up to 160M transmission distance.

Designed to fit seamlessly into any decor

The wall switch plate (sold separately) and receiver are self-powered and can be used with any light; halogen, incandescent, CFL bulbs, fluorescent tubes, LED lighting, etc. Small size receiver (connect to lights or other loads) fits limited space, such as electrical junction box, lights canopy, recessed box, existing switch box, hidden in ceiling or surface mounting, etc.

Safety & Easy to Install

No power needed, no complex facility, no complicated setup, only two easy steps for installation & pairing! Anyone can do it with some basic experience in wiring.

Durable & Flexible Coding

Using encrypted wireless signal protocols & passed a 200,000 times endurance test, 20 years lifetime. You can have a switch control multiple lights or multiple switches control a light, like 1-2 way, 3-way, multi-ways switch.

Phone Pairing

1. After downloading APP, follow the prompts to register the account.
2. The phone and APP pair need to use the home wireless router.
3. Turn on the power of the controller and confirm that the indicator light rapidly blinks.
4. Follows the prompts to select the controller model for quick pairing.
5. If the controller is not rapidly blinks, follow the prompts to set the receiver to rapidly blinks.

Switch Ordinary Pairing

1. Long press the key of controller for 3 seconds, the indicator light flashes.
2. Press down the switch key, the indicator light will go out, which means that the pairing is successful.
3. If the pairing switch is push button switch and the lamp is dimming, long press the switch to adjust brightness of the lamp.

Switch Direction Pairing

1. Long press the key of controller for 3 seconds, the indicator light flashes.
2. Quickly press the switch twice (within 0.5 seconds) the indicator light will go out, which means that the pairing is successful.
3. Rocker switch after direction pairing means always *upside--Off/ downside--On.
4. Push button switch left and right two keys as a group, press the right key to ON, press the left key to OFF. In dimming mode keep press the right key to brighten, keep press the left key to dim.

Clean pairing information

1. Long press the pairing button for 13 seconds, the indicator light flashing until it goes off.
2. After the pairing information is cleared, the pairing switch is no longer valid. Need to be repaired to use.

Replace the fuse

After the fuse blows, first remove the fault and replace the same fuse.

+ Voltage Range: 85~260V 50/60Hz
+ Power Rating: LED 100W (1A)
+ Temperature Range: -20~50°C
+ Effective Range: 160m (Outdoor) | 30m (Indoor)
+ Communication: WiFi & Ebelong 1.1
+ Capacity: Up to 10 Switches can be paired
+ Sensitivity: -110dBm
+ Dimension: L70*W44*H29mm
+ Standards: EN61058-1;2002+A2;2008; GB 14536.1-2008