Everspring Motion Detector for Indoor and Outdoor use

Everspring Motion Detector for Indoor and Outdoor use

Availability: Available

Currently 1 - 2 days dispatch

  • Brand:Everspring
  • Technology:✓ Z-Wave
£36.50

This motion detector (PIR = passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device. It needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is required.

The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping mode. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.

+ Z-Wave Plus, S2 Authentication
+ EU frequency: 868,42 MHz
+ IP 44 protection
+ Battery lifetime: 2 years depending on the wake up interval

Fully Compatible
+ POPE011801
+ ZMEEUZBWAY
+ ZMEEUZBWD
+ ZMEERAZ2
+ ZMEEUZB1
+ ZIPETILEZIG-B
+ ZIPETILEZIG-W

NOT Compatible
+ FIB_HOMEC2
+ FIB_FGHCL
+ MCVEVERA_PLUS
+ ZIP_Zipabox-G1