Fibaro Wall Plug (Type G)

Fibaro Wall Plug (Type G)

Available: Available

18 Items in External Warehouse |

  • Brand:Fibaro
  • Support:Full UK/EU Based Tech Support
  • Technology:✓ Z-Wave

The Fibaro Wall Plug is a remotely controlled plug-in switch with a built-in feature to measure power and energy consumption. Fibaro smart plug makes it possible to control electrical devices in a convenient, worry-free and maintenance-free way. It changes the colour of the seamless crystal LED ring, informing you about the current load of the connected appliance with just a glance.

Wall Plug has been meticulously designed, down to every last detail. Let it enchant you with its sophisticated rounded design and high-end quality hardware. Breathtaking beauty and uncompromising reliability come together in this elegantly designed device.

Wall Plug doesn’t require any installation tools or electrician. Just take it out of the box, put it into an outlet, and plug in any electrical device you want to control. It is one of the most universal smart home devices that converts almost any type of household appliance plugged into it to a smart device. Using the mobile application, you can get the status of the connected device, see how much energy the connected device is using, and switch the devices on or off. This control is at your fingertips from anywhere around the world.

+ Power measurement
+ Z-Wave Plus
+ Power supply: 230V AC, 50/60Hz
+ Rated load: 13A - resistive loads; 8A - incandescent loads; 13A - inductive general purpose

+ Power supply: 230V AC, 50/60 Hz
+ Rated load (continuous load): 230V AC, 50/60 Hz | Resistive loads: 13A | Incandescent loads: 8A | Inductive general purpose | (cosφ = 0.75-0.8): 13A | Pilot duty (cosφ < 0.35): 700VA | Motor: 750W | Electronic ballasts: 3A
+ Rated impulse voltage: 2.5kV Maximum inrush current: 80A (20ms)
+ To be used with G type sockets: BS 1363
+ ICE Protection Class: Class I
+ Active element: Micro-gap relay switch μ
+ Pollution Degree: 2 (home and office use, indoor only)
+ Radio protocol: Z-Wave (500 series chip)
+ Radio frequency: 868.4, 868.42 or 869.8 MHz
+ Maximum transmit power: EIRP up to -0.5dBm
+ Range: up to 50m outdoors | up to 40m indoors (depending on terrain and building structure)
+ Operating temperature: 0–40°C
+ Dimensions (Height x Width x Depth): 56 x 56 x 58.5mm
+ EU Directive compliance: RoHS 2011/65/EU | RED 2014/53/EU

Fully Compatible
+ POPE011801