Create your own Z-Wave world, either by wiring up to your DIY project or even design your custom PCB to include Z-Uno Module.
This small Z-Uno Module is made for business customers and geeks.
Z-Uno Module is designed to be added in your smart products like any other RF chip. It can be used as a Z-Wave modem or can also do processing of input signals in your device replacing existing MCU. Z-Uno Module have 26 GPIO, USB, UART, SPI, I2C, 1-Wire, ADC and PWM to control a lot of peripherals. Z-Uno Module 100% software compatible with the Z-Uno Prototyping Board.
Z-Uno is Z-Wave Plus compliant and supports Z-Wave Security S2.
+ Small Z-Uno Module
+ Create smart products by your own
+ 26 GPIO, USB, UART, SPI, I2C, 1-Wire, ADC and PWM
+ S2 security standard
+ Wireless technology: Z-Wave Plus
Key Z-Wave Features
+ Power modes: Always on (45 mA) | Sleeping mode (~2 uA) | Frequently Listening (FliRS) (~70 uA)
+ Z-Wave Plus compliant: Status reports in Life Line | Control of other Z-Wave devices
+ Supported channels (up to 32 channels): Binary Switch | Multilevel Switch | Colour Switch | Binary Sensor (Notification) | Multilevel Sensor | Meter | Thermostat
+ Association control groups (up to 5 groups): Basic | Multilevel Switch | Door Locks Scene
+ Built-in Z-Wave Security:
+ Non-secure mode | Security S0 (AES 128 bits) | Security S2 (AES 128 bits, ECDH)
+ Protocols: ITU G.9959 | Z-Wave Plus
Key Hardware Features
+ Programming in C/C++ language: Optimized 8051 CPU Core | 30 kB (6 kB with S2) Flash | 2 kB (2kB with S2) RAM
+ Hardware peripherals: Build-in Z-Wave RF, ITU G.9959 compliant | 26 GPIO | 4 ADC 12 bits | 4 PWM | 2 UART | 1 USB | 1 SPI (master or slave) | 4 IR controllers, 1 IR learn capability | 8X6 Keypad scanner | 1 GPT | 3 Interrupts | 1 I2C (software on GPIO) | 1 1-Wire (software on GPIO) | 256 kB EEPROM
+ RF antenna: 86 mm wire | u.fl 50 Ohms | pin 50 Ohms